| The ALG Anticorrosion Ion Grounding Electrode is apt to be used in the special environment that with limited grounding area or requiring high grounding standard. Compared with the traditional grounding methods, it can release the lightning shock current and problem-induced current to the soil more quickly,and electrode innerfill constantly supply absorbed moisture and electric ion to HC high energy backfill material and soil around,so that soil maintain low resistance rate to keep grounding system in a good condition.
Features
1.The grounding resistance almost not changes with the seasons, thus it is with high stability and the routine maintenance is not needed.
2.The electrode is made of corrosion resistant alloy material, and it can be used for 30 years at least.
3.The electrode can tightly bond with circumambient soil in high efficiency, thus expand current releasing area.
4.It has strong resistance to the direct and side lightning shock.
5.It has good grounding effect which requires small working area and a little work amount.
6.It¡¯s technical parameter meet the standard of UL467
Applications
It is ideal to be used in regions of high soil resistance and cities with very dense buildings.
Specification
|
Commodity |
Model |
Diameter(mm) |
Length(mm) |
Weight(Kg) |
Reference |
|
ALG anticorrosion ion grounding electrode |
FF-10A |
50 |
3000 |
16.30 |
brass straight type,anticorrosion process internal and external |
|
FF-20A |
50 |
6000 |
28.30 |
brass straight type,anticorrosion process internal and external |
|
FF-30A |
50 |
9000 |
46.00 |
brass straight type,anticorrosion process internal and external |
|
FF-10B |
50 |
3000 |
16.00 |
brass straight type,anticorrosion process internal |
|
FF-20B |
50 |
6000 |
28.00 |
brass straight type,anticorrosion process internal |
|
FF-30B |
50 |
9000 |
45.50 |
brass straight type,anticorrosion process internal |
|
FF-10C |
50 |
3000 |
23.50 |
steel straight type,anticorrosion process internal and external |
|
FF-20C |
50 |
6000 |
45.30 |
steel straight type,anticorrosion process internal and external |
|
FF-30C |
50 |
9000 |
66.30 |
steel straight type,anticorrosion process internal and external |
Electrode
Accessories
1.Grounding Inspection Pit(Protective Hood)
It is made of high strength plastic and mainly be used to protect the ALG Anticorrosion Ion Grounding Set installed outdoors. Each of the protective hood has a vent-cover, so air may enter the vent hole of the ALG anticorrosion ion grounding set.
Grounding Inspection Pit
Compliant with BS5834 loading requirements for pavements
2.HC High-Energy Back Fill Material
The Back Fill Material used in the ALG Anticorrosion Ion Grounding system with volcanism formed clay as its main material, having been processed by special chemical method, has excellent conductivity, and it can improve the performance of the grounding system. The Back Fill Material was mixed with water in ratio of 2:1, then be sent to the electrode surrounded area of the hole by pump.
HC High-Energy Back Fill Material
|
